7 Steps to Design an Acrylic, Swanstone Or Tile Bathtub Or Shower Wall Surround Project

Selecting the perfect bathe or bathtub wall encompass might be powerful. Do you have to set up acrylic, a strong floor materials like Swanstone, or use ornamental tiles? Will the standard of those merchandise stand the take a look at of time? Which one is the perfect match in your price range and tastes?

Be taught 7 sensible steps to find out which wall system is finest for you.

Step 1 – Decide if you would like to go over your current partitions – To economize it is good to position a bath or bathe wall encompass over an current floor. It’s doable to make use of specialised glue or butyl tape to stick acrylic how-to-handmake-a-small-sheet-metal-box or Swanstone strong floor supplies over current tile so long as the present partitions usually are not spongy or bowed. If in case you have a plastic or fiberglass system it’s not doable to position new partitions over your current supplies. In these circumstances the present system might want to eliminated, new backerboard put in after which new partitions put up.

Step 2 – Assume by your budget- When you’re like most you need to get essentially the most worth in your cash – a top quality materials which doesn’t break the financial institution.

When you’re on the lookout for a simple to scrub price efficient materials acrylic is a superb selection. It’s heat to the contact, installs rapidly and comes with a lifetime guarantee.

For a extra elegant look (which is offered in additional ornamental patterns and designs) take into account a Swanstone strong floor wall. Swanstone is straightforward to take care of, has no joints to grout or seal and is available in all kinds of decisions.

Normally the costliest product is tile (except you could have the flexibility to put in it your self and save the labor hours- tile is essentially the most time consuming to put in vs. sheet merchandise like acrylic & Swanstone). There are limitless decisions and worth ranges of tile and it creates a sublime look as nicely.

Step 3 – Choose your materials, designs, colours and accents you need – After you have chosen between acrylic, Swanstone and tile you are prepared to decide on your design and coloration(s).

Acrylic wall surrounds are available in a large number of colours, patterns and finishes. There are strong, granite, metallic and in addition marble finishes. As well as the partitions you choose might be easy, 4″ x 4″ simulated tiles, 8″ x 10″ simulated tiles or perhaps a stone look. Acrylic is not only a white easy confronted wall.

Swanstone, whereas it has been recognized for it is power, coloration and texture constant, grout-free high quality, and the actual fact it will not crack or craze – has a really broad vary of ornamental choices as nicely. There are over 45 normal, excessive gloss, and granite colours. As well as there are ornamental panels to assemble distinctive architectural designs named Pebble, Geometric, Beadboard, Tangier and Barcelona. There are additionally designer trim items and rosettes to create a completed look.

Tile affords the widest product choices by way of coloration, accents, borders, sizes and thicknesses. Make sure that to search for a excessive density water-proof tile in your bathtub or bathe.

Step 4 -Select your backerboard. Choose materials to stick the wall materials and within the case of tile end the face of the wall- What you do not see in a bath or bathe wall panel venture is as vital as what you do see. Use the suitable materials(s) behind the wall. Listed here are some suggestions:

Acrylic – If the tile partitions are in fine condition set up over them by adhering the acrylic with butyl tape and coloration match sealant. This can save on landfill prices, cut back the venture set up time and get monetary savings. If the prevailing wall can’t be put in over put up moisture resistant inexperienced board or a cement backer board.

Swanstone – Like acrylic if the tile is in good structural form set up over the prevailing. If not, Swanstone might be put in over greenboard or a cement board utilizing particular glue.

Tile – Poorly achieved tile installations have brought on a lot of wasted cash traditionally (low cost backer board might need been used, poor grouting jobs, poor work within the corners are just some of the issues). For tile installations by no means use inexperienced board – use both a water-proof cement board or a water-proof extruded polystyrene board like that constituted of Wedi Company. These boards needs to be glued and screwed to your framing. Along with utilizing the suitable backer board take into account investing in a urethane grout. Such a grout doesn’t have to be resealed and is waterproof. Though it is going to price you extra up entrance it is going to get monetary savings down the street in the necessity to regrout, or worse but the necessity to redo the bathe in case you have any water harm.


Leave a Reply

Your email address will not be published. Required fields are marked *